Goldblatt 7-inch Wet Tile Saw Ceramic Cutting Tabletop Saw with Water Storage, 0-45 Degree

TIPS: After use, you can rinse the countertop with clean water and leave it in a dry state to reduce rust.
Versatile Tile Wet Saw - 7-Inch electric wet saw for tile cutting, equipped with upper blade guard, rip fence, miter guide, saw blade, water tray, spanners basic accessories and manual. You can adjust cutting angles from 0 to 45° and 90° , maximum cutting depth of 1.25 inches. Featured with 3550 RPM no load speed and 16mm thick diamond disc, designed to cutting tiles in different size and shape. Suitable for both DIY lovers and professionals.
Premium Wet Tile Worktable - Made from high-quality material, hard chromium surface, durable and scratch resistant, it keeps its polished finish even after extended use. The working table size is 15-1/4"x15-5/8"(385 x395 mm), with a voltage of 120V~ 60Hz 4.8AMP. Provide 4 mini footplugs for shock absorption and smooth operation. Tool set up, install the blade, guard and other components with the help of a wrench, it's ready to start cutting.
Removable Water Tray design - Fill the water tray to the maximum fill line on the sides of the tray, then slide it under the lower blade guard to fit. The level is between the MIN and MAX on the lower blade guard. The cutting process contains dust and debris, which can be absorbed by the water tray to a certain extent, and improve cutting performance and efficiency. NOTE: Do not operate the Tile Saw with too little or too much water in the Water Tray.
Available Multiple Cutting Modes - Our wet ceramic tile cutter provides three cutting ways including straight, miter or bevel cuts for DIY projects or professional use. Make sure the workpiece is clear of the blade, and avoid cutting many workpieces or cutting together as the projects may get stuck in the disc and fly out uncontrollably. Cut ceramic, porcelain tile, marble, slate and stone easily and move it to the workshop or even to the job site.
Guide to Assemble and Maintain - Please read the instructions and make sure the tool is set up before use. Install the Blade and check that the upper and lower blade guards are in place, and ensure the base is on a steady level work surface so the water level of the tank can be accurately measured and maintained. Keep workpieces pressed firmly against the table and fence while cutting. When the cut is made, wait for the blade to a complete stop.